Jiffy Universal-Ceramic Adjusters: Polishing Tips

Quick Answer

Use Jiffy Universal-Ceramic Adjusters and Polishers in a sequential grit progression—coarse to fine—with light intermittent pressure and water spray to achieve a smooth, glossy finish on all ceramics, including high-strength types.

Step-by-Step Polishing Process

1. 1. Select the Correct Adjuster Grit: Start with the coarse (dark blue) adjuster to contour and remove bulk excess. Use light, intermittent pressure at moderate speed (10,000–15,000 rpm) with water spray to prevent overheating. Skipping the coarse step or using heavy pressure can cause chipping or thermal damage to the ceramic.
2. 2. Progress to Medium Grit: Switch to the medium (green) adjuster to refine the surface and remove scratches left by the coarse grit. Maintain light pressure and water spray; reduce speed slightly if chatter occurs. Do not jump directly from coarse to fine—the medium grit bridges the scratch pattern and reduces polishing time.
3. 3. Fine Polish with the Pink Polisher: Use the fine (pink) polisher at lower speed (5,000–10,000 rpm) without water for a dry high-gloss finish. Apply light, sweeping motions and check the surface under magnification for any remaining scratches. If you see scratches, go back to the medium step rather than pressing harder with the fine polisher—this avoids creating a wavy surface.

Product Facts

• Jiffy™ Universal-Ceramic Adjusters and Polishers: DENTAL PROFESSIONALS: Ultradent’s Jiffy Universal system is a finishing system for all ceramics, including high-strength ceramics. You can use one kit for every ceramic restoration in your practice, simplifying inventory and ensuring consistent results across materials.