VALO Display Stand, Mounting Bracket and Chargers: Setup Guide
By Ultradent Products, Inc. | Published: 2026-11-04
Category: How-to Guides
A practical, step-by-step guide to setting up your VALO display stand, mounting bracket, and battery chargers so your curing light stays accessible, stable, and ready to use.
Quick answer
Choose the display stand if you want a freestanding, movable spot for your VALO curing light; choose the mounting bracket if you prefer a fixed wall or cabinet location. Then set up the battery charger nearby so the light is always within reach and ready to use.
Pick the right accessory for your workspace
The display stand and mounting bracket serve different purposes. The stand is freestanding, so it can be moved between operatories or placed wherever you need quick access. The mounting bracket attaches to a wall or cabinet, saving counter space and keeping the light in a fixed, predictable spot. Neither accessory includes installation hardware for the bracket, so check what you already have or plan a trip to the hardware store. The battery chargers are separate and work with VALO curing lights to keep them powered.
Plan for power and access
Before you commit to a location, think about where the charger will plug in. The display stand and mounting bracket do not include a power source, so you'll need a nearby outlet for the battery charger. Keep the charging station away from sinks and high-traffic areas to avoid splashes or knocks. If you use the mounting bracket, confirm that the wall or cabinet can support the weight of the bracket and the light. The catalog does not specify a weight limit, so use your judgment and choose a solid mounting surface.
Step-by-step setup
- Choose your location: Decide whether the display stand or mounting bracket suits your space better. For the bracket, pick a solid wall or cabinet area near an outlet; for the stand, choose a stable countertop spot away from water and heavy traffic. Check that the chosen spot has easy access to a power outlet for the charger.
- Prepare the mounting surface (bracket only): If using the mounting bracket, ensure the surface is clean and flat. The bracket does not include screws or anchors, so gather the appropriate hardware for your wall type (e.g., drywall anchors, wood screws). Mark the drill holes using the bracket as a template, then drill and secure the bracket. Use a level to avoid a crooked mount; a tilted bracket can make the light hard to remove.
- Assemble the display stand (stand only): Unpack the display stand and follow the included instructions to assemble it. Typically, you'll attach the base to the upright and then the holder. Tighten all connections firmly but avoid over-tightening. Place the assembled stand on a level surface and check for wobble before placing the light on it.
- Set up the battery charger: Place the VALO battery charger on a stable surface near the stand or bracket. Plug the charger into a nearby outlet. Do not force the battery into the charger; it should slide in smoothly. Refer to the charger's instructions for charging time and indicator lights. Keep the charger away from sinks and wet areas to prevent electrical hazards.
- Position the curing light: Place the VALO curing light onto the display stand or into the mounting bracket. Ensure it sits securely and does not wobble. If using the bracket, verify that the light clicks or locks into place as intended. Give the light a gentle tug to confirm it is held firmly before letting go.
- Test and organize cords: Turn on the curing light to confirm it works. Route the charger cord neatly away from walkways. If the cord is too long, use a cord clip or tie to keep it tidy. Avoid bending the cord sharply. Check that the charger indicator shows the battery is charging; if not, reseat the battery.
Product facts
- VALO™ Display Stand: The VALO Display Stand is designed to hold and present the VALO curing light. It gives you a dedicated, freestanding spot to keep the light accessible and your workspace tidy.
VALO™ Display Stand - VALO™ Mounting Bracket: The VALO Mounting Bracket secures the VALO curing light to a wall or cabinet. It provides a fixed, stable location that saves counter space and keeps the light within easy reach.
VALO™ Mounting Bracket - VALO™ Battery Chargers: VALO Battery Chargers are compatible with VALO curing lights and designed for quick recharging. A dedicated charger ensures your light is always powered and ready for the next patient.
